Attic, whole-home, and metal building spray foam for Moore homes and buildings — quoted free, per job.
Rebuilds and newer construction — foam for storm-resilient, well-sealed homes.
Moore has rebuilt heavily, and its newer construction is a natural fit for spray foam: a tight, well-sealed envelope holds up better through Oklahoma storm seasons, keeps conditioned air in during outages, and quiets wind noise. Attic and whole-home jobs on rebuilds are the bulk of the work here.
More of Moore's housing has been rebuilt in the last quarter-century than in almost any other Oklahoma city. Whole neighborhoods were rebuilt after the 1999 and 2013 tornadoes, and post-2013 construction has kept going along the I-35 corridor: modern two-story production homes, strengthened building codes, and — the layout that defines the era — a finished bonus room over the garage. Between the rebuild areas sit pockets of 1970s and 1980s homes that were never in a storm path and still carry their original attic insulation.
That mix produces a particular set of foam jobs. Some rebuilds were foamed as they went up; many were insulated with conventional batts and blown-in to hold costs down during an expensive rebuild, and those homes are retrofit candidates now. The modern builds share one notorious room — the bonus room over the garage, wrapped in attic-temperature surfaces and uncomfortable in both summer and winter. And because this is storm country, Moore homeowners ask about the structural side of closed-cell foam more than anyone else in the metro. Moore is part of the same service area as our spray foam insulation in Oklahoma City coverage.
Bonus rooms over garages are the signature Moore job. Foam on the garage ceiling — the bonus room's floor — and on its knee walls seals the surfaces that make that room the hottest in the house in summer and the coldest in winter. It is a smaller, targeted job compared with a full attic.
Attic rooflines on modern two-stories. Most of Moore's newer homes run their ducts through the attic, which makes the sealed-attic roofline design the usual winner — see the attic insulation page for the roofline-versus-floor breakdown.
Whole-home foam on rebuilds and new construction — walls and roofline sprayed before drywall, with closed-cell's added racking strength a real consideration in this city rather than a footnote.
Attic floor upgrades in the older pockets — the 1970s and 1980s homes between the rebuild areas, where original batts have settled and the attic leaks air in both directions. Old material out, foam in, vented attic kept.
Metal shops on the larger lots toward Moore's edges, foamed with closed-cell for insulation and condensation control in one pass — see the metal building insulation page. Crawl spaces are rare in Moore's newer slab-built stock; where a pier-and-beam home does turn up in the older neighborhoods, closed-cell crawl sealing works the same way it does across the metro — detailed on our crawl space insulation page.
Open-cell is the budget-friendly pick for interior walls and attic floors; closed-cell brings higher R-value per inch, moisture resistance, and rigidity for metal and exposed walls. The full plain-English comparison is on our open-cell vs. closed-cell page, and the free quote settles which fits your building.
Moore attic jobs commonly run $2,500–$6,000 as a planning range depending on size and foam type, and installed spray foam across the metro plans at roughly $1.50–$4.50 per square foot — open-cell at the lower end, closed-cell at the higher end. Targeted jobs like a bonus room over a garage cover a smaller area and price below a full attic. Typical attic numbers for Moore-sized homes:
| Moore attic job | Typical planning range |
|---|---|
| Foam on attic floor — ~1,000 sq ft attic | $2,000–$3,200 |
| Foam on attic floor — ~1,500 sq ft attic | $2,800–$4,400 |
| Roofline / sealed attic — ~1,500 sq ft attic | $4,600–$6,800 |
| Roofline / sealed attic — ~2,000 sq ft attic | $6,000–$8,400 |
Whole-home foam on new construction and rebuilds is priced from plans using the same per-square-foot planning range, and removing old insulation, access, and the R-value target all move a job inside its range. Every figure on this page is a planning range, not a quote — each home is quoted free after an inspection. For the full metro pricing picture, including per-board-foot math, see how much spray foam insulation costs in Oklahoma City.
We also serve spray foam insulation in Norman, OK and spray foam insulation in Yukon, OK, plus the rest of the Oklahoma City metro.
Rooms over garages — the finished room over the garage, or FROG — are the hardest rooms in a modern Moore home to keep comfortable. The room sits over an unconditioned garage and is wrapped on several sides by attic-temperature knee walls and roof surfaces, and during fast production building those floors and walls were often insulated lightly. Foaming the garage ceiling (the room's floor) and the knee walls seals those surfaces properly, and it is one of the most common targeted jobs quoted in Moore.
Yes. Closed-cell foam bonds to studs and sheathing and cures rigid, and testing has repeatedly shown it increases the racking strength of a wall assembly compared with batt-insulated or empty walls. In storm country that is a genuine secondary benefit on top of the air seal, and one reason closed-cell is specified so often on Moore rebuilds. It is not a substitute for code-required storm construction, anchoring, or a safe room.
Attic jobs in Moore commonly run $2,500–$6,000 as a planning range depending on size and foam type, and installed spray foam across the metro plans at roughly $1.50–$4.50 per square foot. Smaller targeted jobs like a bonus room over a garage price below a full attic because the area is smaller. Whole-home foam on new construction and rebuilds is quoted from plans. All figures are planning ranges; the quote is free and per job.
Not necessarily. Many post-2013 rebuilds were foamed as they went up; plenty of others were rebuilt with conventional insulation to hold costs down. What matters is what is actually in your attic and walls now, not the year the home was built. The free inspection measures the current insulation and air leakage and tells you plainly whether foam would change anything — if your rebuild is already tight, you will hear that.
Yes. A tight envelope loses heated and cooled air far more slowly than a leaky one, so during outages — after storms, or in winter ice events — a well-sealed foam home drifts toward outdoor temperatures noticeably more slowly, which buys real time and comfort. It does not replace a generator or a storm plan; insulation and sealing are the passive half of riding out an outage.
The rule is the same as anywhere in the metro: if ducts or the air handler are in the attic, the roofline usually wins, because the equipment leaves the 130-degree space; if the attic is empty of equipment, floor foam is the lower-cost fix. Moore's newer two-stories usually do have attic ductwork, which is why roofline jobs are so common here.